Loader Image
  • Any Questions? Call Us: +91-79- 4898 7899
  • Get social with us!

    TE0713

    FPGA module with Xilinx Zynq Artix-7,  USB 3.0 to FIFO bridge, 1 GByte of DDR3L SDRAM, 32 MByte Flash memory, Plug-on module with 2 x 100-pin and 1 x 60-pin high-speed hermaphroditic strips, carrier board avialable

    more details

    TE0803

    MPSoC module with Xilinx Zynq UltraScale+, 4 x 512 MByte (2 GByte) 64-Bit DDR4 SDRAM (up to 8 GByte max), 2 x 256 MBit (2 x 32 MByte) SPI Boot Flash dual parallel (up to 512 MByte max), Plug-on module with 4 x 160 pin B2B connectors, carrier board and starter kit available..

    more details

    TE0820

    MPSoC module with Xilinx Zynq UltraScale+, 1 GByte (2 x 512 MByte) DDR4 SDRAM with 32-Bit width, 2 x 32 MByte Flash memory, B2B connectors: 2 x 100 pin and 1 x 60 pin, carrier board available

    more details

    TE0714

    FPGA module with Xilinx Artix-7 35T or 50T, 16 MByte QSPI Flash, smallest module with tranceivers, industrial temperature range, carrier board available

    more details

    TE0745

    SoC module with Xilinx Zynq-7030 or Zynq-7045, 1 GByte DDR3 SDRAM, 32 MByte SPI Flash, 1 GBit Ethernet, 8 x GTX (7030: 4 GT), RTC, industrial temperature range, carrier board available

    more details

    TE0841

    FPGA module with Xilinx Kintex UltraScale, 2 banks with 512 MByte each, 16-bit wide DDR4, 32 MByte SPI Boot Flash, 3.2 mm mounting holes for skyline heat spreader, serial transceiver: GTH 8 Lanes (all), industrial and commercial temperature range, carrier board available

    more details

    TE0808 UltraSOM+

    MPSoC module with Xilinx Zynq UltraScale+, 4 x 512 MByte (2 GByte) 64-Bit DDR4 memory, 2 x 256 MBit (2 x 32 MByte) SPI Boot Flash (dual parallel), B2B connectors: 4 x 160 pin, serial transceiver: GTR 4 (all) + GTH 16 (all), industrial temperature range, carrier board and starter kit available

    more details

    TE0725LP

    FPGA module with Xilinx Artix-7 100T, 32 MByte Flash, optional HyperRAM or HyperFlash, 2 x 50 pin with 2,54 mm pitch, VIN 3,3V or 1,8V, commercial temperature range available (industrial temperature range on request)

    more details

    TE0726 “ZynqBerry”

    SoC module with Xilinx Zynq-7010 with Raspberry Pi form factor, 512 MByte (128 MByte) DDR3L, 16 MByte SPI Flash, Micro SD socket, 4 USB with power switches, 100 MBit Ethernet, DSI and CSI-2 Connector (display and camera), HAT header with 26 I/O’s, commercial temperature range

    more details

    TE0729

    SoC module with Xilinx Zynq-7020, 512 MByte DDR3, 32 MByte QSPI-Flash, 1 x 10/100/1000 Mbps Ethernet transceiver PHY, 2 x 10/100 Mbps Ethernet transceiver PHYs, RTC, equipped with sulfur resistant resistors, industrial temperature range, carrier board available

    more details

    TE0723 “ArduZynq”

    SoC module with Xilinx Zynq-7010 with Arduino Shield form factor, 128 MByte DDR3L; version M: 512 MByte DDR3L, 16 MByte SPI Flash, Hi-Speed USB2.0 ULPI Transceiver, 23 FPGA I/O’s on B2B connectors available, commercial temperature range

    more details

    TE0782

    SoC module with Xilinx Zynq-7035, Zynq-7045 or Zynq-7100, 1 GByte DDR3, 32 MByte QSPI Flash, 4 GByte eMMC (optional up to 64 GByte), 2 x Gigabit Ethernet Tranceiver, RTC, optional 2 x 8 MByte HyperRAM (max. 2 x 32 MByte), 16 GTX high-performance Tranceiver Lanes, industrial temperature range

    more details

    TE0722 “DIPFORTy1 Soft Propeller”

    Propeller compatible DIP40 pinout module with Xilinx Zynq-7010, 16 MByte SPI Flash (primary boot), 33.333 MHz Clock (MEMS Oscillator), Total user accessible PL I/O: 46 (+3 Input only), MicroSD Card socket, commercial temperature range

    more details

    TE0728

    SoC module with Xilinx automotive Zynq-7020, 512 MByte DDR3, 16 MByte QSPI Flash, 2 x 100 MBit Ethernet Transceiver (PHY), 76 single ended I/O, 24 LVDS pairs (48 I/O) and 42 MIO available on B2B connectors, CAN Transceiver (PHY), automotive temperature range, carrier board available

    more details

    TE0715

    SoC module with Xilinx Zynq-7015 or Zynq-7030, 1 GByte DDR3, 32 MByte QSPI Flash, 1 GBit Ethernet, 4 GTP/GTX Tranceivers, Programmable Clock Generator: Transceiver Clock (default 125 MHz), industrial and commercial temperature range, carrier board available

    more details

    TE0712

    FPGA module with Xilinx Artix-7 100T or 200T, 1 GByte DDDR3, 32 MByte Quad-SPI Flash, 100 MBit Ethernet, 4 Multi Gigabit transceivers, industrial and commercial temperature range, carrier board available

    more details

    TE0711

    FPGA module with Xilinx Artix-7 35T or 100T, 32 MByte QSPI Flash, 100 MHz MEMS oscillator, 178 FPGA I/O’s (84 differential pairs), 3 User LED’s, industrial and commercial temperature range, carrier board available

    more details

    TE0710

    FPGA module with Xilinx Artix-7 35T or 100T, 512 MByte DDR3, 32 MByte QSPI Flash, 2 x 100 MBit Ethernet, industrial and commercial temperature range, carrier board available

    more details

    TE0720

    SoC module with Xilinx Zynq-7020, 256 MByte/512 MByte DDR3L/1 GByte DDR3 (depending on version), 32 MByte SPI Flash, 4 GByte e-NAND (up to 32 GByte), 152 FPGA I/O’s available on B2B connectors, RTC, 3 User LED’s, automotive, industrial and commercial temperature range, carrier board and starter kit available

    more details

    TE0741

    FPGA module with Xilinx Kintex-7 70T, 160T, 325T or 410T, 32 MByte Quad-SPI Flash, max. GTX transceiver data rate 10,3125 Gb/s (default 6,6 Gb/s), 8 Multi Gigabit Transceivers, 2 User LED, 1 DONE PFGA pin LED, industrial and commercial temperature range, carrier board available

    more details

    TE0630

    FPGA module with Xilinx Spartan-6 LX45, LX75 oder LX150, 128 MByte DDR3, 8 MByte SPI Flash, up to 40 different and up to 109 single end FPGA I/O pins available on B2B connectors, 1.2 V, 1.5 V, 2.5 V = VCCAUX and 3.3 V power rails, 4 User LED, 1 User Push-Button, 2 User DIP Switches, industrial temperature range, carrier board available

    more details

    TE0600

    GigaBee module with Xilinx Spartan-6 LX45, LX100 or LX150, two independent 128 MByte DDR SDRAM banks (optional 2 x 512 MByte DDR SDRAM), 16 MByte SPI Flash, 10/100/1000 tri-speed GBit Ethernet transceiver (PHY), JTAG Port, industrial and commercial temperature range, carrier board available

    more details

    TE0320

    Module with Xilinx Spartan-3A, 1 GBit DDR RAM up to 1333 MByte/s bandwidth, 32 MBit SPI Flash, 109 I/Os (+ 10 dual-purpose pins) available on B2B connectors, 4 LED, 2 Push Buttons, 8 DIP Switches, industrial and commercial temperature range, carrier board available

    more details

    TE0300

    FPGA module with Xilinx Spartan-3E, 32 MBit SPI Flash, 512 MBit DDR RAM up to 666 MByte/s bandwidth, 3 on-board DC-DC converters for high efficieny, 104 I/Os + 6 Inputs available on B2B connectors, industrial and commercial temperature range, carrier board available

    more details

    TE0140

    Module with Xilinx Spartan-3, USB 2.0 transceiver, 16 KBit EEPROM, 120 available I/O’s on B2B connectors, one LED, 1 push button, commercial temperature range, carrier board available

    more details